The designs available in the Helix bathroom taps range are as follows, for choices of Basin mixers you have the monobloc basin mixer with small spout (pictured right), a three hole wall mounted basin mixer, a three hole deck mounted basin mixer.

There are of course both pairs of Helix basin taps and Helix bath taps.

For the bath there are also a good range of choices to be had starting with the Bath fillers where you get a choice of two versions with different sized spouts a larger and a smaller spout, you can also use the wall mounted 3 hole bath filler or a deck mounted 3 hole bath filler, there is even the ability to use there deck mounted side bodies and a overflow bath filler with the use of the Helix Cross free flow bath filler overflow.

For bath shower mixers you could use the two standard options of a small spout bath shower mixer or the large spout bath shower mixer, the last option for bath shower mixers is the four hole bath shower mixer where you have a hot and cold deck side body with a spout that has a built in diverter to change over from the bath spout to the shower handset with pull out hose.

Showering with the Helix Cross thermostatic showers is full of options as well, you have both oval and square back plates on offer to choose from. The recessed dual control shower valve with square back plate is the best selling option, then there is the same dual control valve with a built in diverter to use with two outlets, the triple shower valve (shown left) is designed to be able to control two outlets at the same time.

For the best prices and where to buy click here.

Crosswater

The choices with in the Status Range stating with the Status Monobloc basin mixer that comes with no pop-up waste so be sure to select a click clack waste as an addition, also you have a mini basin mixer for the cloakroom or smaller basins, there is a tall monobloc basin mixer for freestanding bowls or for a three hole basin you have the 3 hole basin set with a very imposing spout, just to finish off the basin mixer range there is a wall mounted 2 hole basin mixer (as shown below) which is my personal favorite.

To allow for baths you have a choice of a bath shower mixer or bath filler with a 3 hole bath filler or a 5 hole bath shower mixer set, they have a set of deck mounted side bodies which you can match up with the Status bath spout for separate parts.

For showering the range is quite limited there is just a manual shower valve or manual shower valve with diverter available which tend to be used more as bath fillersnow a days the diverter model could also be used to fill up a bath and also divert to a shower handset.

The Crosswater monobloc basin mixer RRP £189.00 best buy Tapstore.com £132.00.

No compromise has been made in bringing this range of taps and showers to the market the angular lines cut by the range are sharp and concise.

The RS2 basin mixer with pop up waste as seen in the image on the left is going to be on sale for £139.00 which is amazing value for the quality of this product.

In the range will also be a tall monobloc basin mixer a basin mixer with a side lever, three hole wall and deck mounted basin mixers, separate basin and bath taps, there is also a monobloc bidet mixer.

For the bathing area there are lots of great choices starting with deck mounted bath filler and bath shower mixer, 3 and 5 hole bath sets, even a freestanding bath shower mixer ( as in image ) or you can make up your own configuration with the separate diverters and side bodies.

With showering always in tapstore’s mind they have made sure that the RS2 comes with all you would need to complete the design in full, there is a recessed thermostatic shower valve options from 1, 2, or 3 way or a surface mounted thermostatic bar shower valve, or the stunning RS2 deluxe multifunction shower with its rectangular shower head and showering handset (as shown).

To see the complete range visit Tapstore.com if you decide this is the range for you mention the bathroom designer and grab an extra 5% discount.