Buying bathroom taps is one of the most important decision you will make when renovating your house, there are so here is a quick guide to assist you in making your choices.
1, Make sure that you buy branded bathroom taps from a reputable retailer through your local showroom or online shop, lots of people are being teased by very cheap prices into buying poor quality import brass ware through shops and the Internet, What I have noticed is that retailers are calling taps by a brand name but when you search for the manufacturer there are no details of them online. So make sure that the manufacturer has a base in the UK.
The reason retailers are now doing this is that it protects them against you finding the same product cheaper elsewhere.
2, It is critical that you select the brand you buy and check that it is suitible for your water system, you need to look for the minimum pressure that a tap or shower will work on e.g 0.2 bar which means you will need 2 meters of distance between the bottom of your cold water storage tank and where the water flows from the taps or shower.
So for each 1 meter in distance you will need 0.1 bar.
*Note If you do not have a cold water storage tank this does not apply unless the stated pressure is above 2.0 bar then call a plumber and get you pressure tested to make sure you have enough.
3, A cheap tap or shower is not good value for money as you will be paying out for a replacement and a plumbers bill which is a lot more costly than paying just a bit more for a recognized brand.
More to follow…
Looking for a shower pump for my house I soon realised that it was not going to be easy, there is so many models and brands, I was being told by my plumber that I should get a shower pump as I would not have enough pressure “get 2.0 bar twin” he said, the local merchant told me that I had to use a bigger pump as they were the only pumps that would do the job, the more I looked the more confused I got.
I then called Tim at Tapstore.com he is their technical man, I explained that I needed to pump my shower in a new loft room and also a bathroom on the first floor, I am rather confused as one guy said just get a 2.0 bar twin and the other said that I needed more and felt that everyone I asked advised something different?
Tim’s answer was to go for a technically brilliant product a Electronic Sensor Pump he explained that ” because my shower head was higher than the cold water storage tank in the loft (negative head) there will not be the flow to start up the pump I needed, and with the downstairs shower there was no real issues about the flow to start the pump (positive head)”. In the end I went for a pump that did everything both the showers, my whole first floor bathroom and my hot kitchen tap which had also given me flow problems.
What I now know is a pump is simply not a pump for any job and each pump has a specific purpose apart from the one I bought. I bought a Salamander Electronic Sensor ESP 2.25 bar CPV Twin pump and it does just the job perfectly, it is designed to work in positive and negative head with independent hot or cold supplies, WC even my dishwasher and washing machine.
RRP £599.00 Tapstore.com price £341.00 Inc VAT and Delivery.
bathroom, cold water storage tank, dishwasher, electronic sensor, esp, flow, kitchen tap, loft room, negative, plumber, positive, pump, Pumps, salamander, Shower, Showers, tap, tapstore, twin pump, washing machine, water storage tank
Posted in Pumps | No Comments »
